JC-SX12 Handheld XRF Rare Earth Analyzer

Laizhou Jincheng JC-SX12 is a portable, non-destructive XRF analyzer designed for rapid rare earth screening in resource recycling. It enables recycling companies to check recycled metals, electronic waste and industrial scrap directly at receiving yards, sorting lines and dismantling sites—without sending every sample to a laboratory.

Rapid screening
Obtain results within seconds to support fast material classification.

Non-destructive testing
Check most materials after simple surface cleaning while preserving their original form.

Field-ready operation
Use the analyzer in locations without fixed laboratory equipment or power supply.

Designed for Rare Earth Sorting and Material Verification

Mixed scrap, electronic waste and magnetic material can be difficult to identify by appearance alone. JC-SX12 provides an efficient preliminary method for locating valuable rare-earth-containing materials before further processing, helping reduce manual guesswork and improve sorting decisions.

Sensitive XRF hardware

A 50 kV miniature X-ray tube, high-performance SDD detector and six automatically switched filters help improve rare earth signal excitation and reduce spectral interference in mixed material matrices.

Practical data management

Results can be exported through USB for storage, comparison, reporting and material traceability. The built-in library covers 12 common rare earth elements and other industrially relevant elements.

Simple field control

Touchscreen and trigger-based operation support single or continuous testing. A rechargeable battery and shock-resistant carrying case allow flexible use at yards, collection points and outdoor sites.

Applications, Delivery and Business Value

JC-SX12 is suitable for recycling companies, industrial solid-waste processors, magnetic material recovery operations and incoming-material inspection. Typical uses include screening NdFeB scrap, checking electronic-waste components, verifying industrial scrap and pre-sorting materials before recovery or refining.

Standard configuration includes the analyzer, battery, charging dock, reference samples and protective carrying case.
Alloy and soil analysis modes can be selected when broader material testing is required.
Laizhou Jincheng provides operation training and technical support to help integrate testing into daily sorting workflows.

Business value: The analyzer supports faster on-site decisions, more consistent resource sorting and a traceable record of screened materials. It is intended for rapid screening and preliminary classification; final settlement or precise content determination should be confirmed with an appropriate laboratory method. Operators must receive relevant training and follow applicable radiation-safety regulations.

Main configuration	1. One set of ore analyzer main unit; 2. One standard sample; 3. Two original rechargeable lithium batteries; 4. Charging base and power cord; 5. One USB flash drive (32G); 6. Five reinforced polypropylene films; 7. One standard portable moisture-proof and shockproof case.
Standard configuration	Ore mode; Optional modes: Alloy analysis mode, Soil analysis mode
Self-diagnostic function	The instrument can automatically diagnose hardware, software, network, battery, etc., and generate logs to facilitate quick troubleshooting.
operating system	Windows CE 6.0 operating system, safe and reliable.
Test methods	The basic parameter method supports empirical coefficient correction for touch or trigger pull control to start the test, eliminating the need for prolonged trigger pull during the test. Alternatively, the trigger can be held down continuously during the test, depending on customer requirements.
Filter	Equipped with 6 filters, it can automatically switch according to the test element.
Excitation source	High-power miniature X-ray tube, 4W high-power X-ray tube, tube voltage 50KV, maximum current up to 100μA; adopts KMX technology, higher X-ray count rate, and ultra-low electronic noise design. No external standard is required before each test; automatic energy calibration and verification.
detector	High-performance imported SDD detector
Detecting elements	38 standard elements:<br>Gadolinium (Gd), Yttrium (Y), Cerium (Ce), Neodymium (Nd), Erbium (Er), Ytterbium (Yb), Platinum (Pt), Polonium (Po), Radium (Ra), Actinium (Ac), Thorium (Th), Uranium (U), Plutonium (Pu), Curium (Cm), Californium (Cf), Einium (Es), Lanthanum (La), Gallium (Ga), Indium (In), Germanium (Ge), Titanium (Ti), Zirconium (Zr), Hafnium (Hf), Tantalum (Ta), Tungsten (W), Molybdenum (Mo), Rhenium (Re), Tellurium (Te), Bismuth (Bi), Antimony (Sb), Samarium (Sm), Terbium (Tb), Dysprosium (Dy), Lutetium (Lu), Scandium (Sc), Niobium (Nb), Nickel (Ni), Manganese (Mn).<br>Other elements can be added according to user requirements.

Rapid On-Site Rare Earth Screening for Resource Recycling

Refunds

Payment method